Contents Wiring diagrams Section: Mechanical - Hydraulic All sections

Brake System: Specifications Lincoln Aviator I

General Specifications

ItemSpecification
Front Disc Brake
Disc brake lining wear limit1.0 mm (0.039 in)
Disc minimum thickness26.5 mm (1.03 in)
Disc lateral runout0.030 mm (0.001 in)
Rear Disc Brake
Disc brake lining wear limit1.0 mm (0.04 in)
Disc minimum thickness10.5 mm (0.40 in)
Lateral runout0.075 mm (0.002 in)

GENERAL SPECIFICATIONS

Torque Specifications

DescriptionNmLb-ftLb-in
Front disc brake caliper bleed screw (M10)1410
Front caliper bolt2720
Front brake hose flow bolt3526
Front disc brake caliper anchor plate bolts210155
Front disc brake shield screws129
Front wheel spindle nut (1)
Rear disc brake caliper bleed screw (3/8 in)2216
Rear caliper bolt2720
Rear brake hose flow bolt3526
Parking brake control bolts2015
Parking brake release bracket bolts327
Parking brake cable clip retaining bolt2015
Parking brake wire from retainer to control arm129
Brake pedal and bracket bolt2518
Brake pedal and bracket nut2518
Brake booster nut2518
Brake master cylinder nut2518
Speed control deactivator switch1713
Adjustable pedal motor cable2518
(1) Refer to FRONT DISC BRAKE procedures for torque specifications.
(1)Refer to FRONT DISC BRAKE procedures for torque specifications.

TORQUE SPECIFICATIONS

The brake system on the Lincoln Aviator has the following components

  1. a vacuum-assisted power braking system.
  2. a front-to-rear split hydraulic system.
  3. front disc brakes utilizing a dual piston brake caliper and disc system.
  4. rear disc brakes utilizing a single piston brake caliper and disc system.
  5. a mechanical parking brake system that activates a drum-in hat system within the rear brake disc.
  6. A 4-wheel anti-lock brake system (4WABS). For additional information, refer to «ANTI-LOCK CONTROL»(ref-193000) .