TORQUE SPECIFICATION
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Propeller intermediate shaft x Transmission | 79 | 805 | 58 |
| Propeller shaft x Companion flange | 74 | 750 | 54 |
| Propeller shaft x Differential | 79 | 805 | 58 |
| Center support bearing x Body | 37 | 375 | 27 |
| Front floor heat insulator No. 1 set bolt | 5.4 | 55 | 48in..lbf |
| Parking brake cable heat insulator set bolt | 5.4 | 55 | 48 in.lbf |
| Front exhaust pipe x Front TWC | 15-5 | ||
| Oxygen sensor x Exhaust pipe | 44 | 450 | 32 |
| RR suspension member brace rear lower x Body | 23 | 235 | 17 |
| Front floor brace center x body | 20 | 204 | 15 |
| Rear suspension arm No. 1 x Rear axle carrier | 75 | 765 | 55 |
| Rear suspension arm No. 2 x Rear axle carrier | 110 | 1,120 | 81 |
| Rear drive shaft x Side gear shaft | 83 | 850 | 61 |
| Rear drive shaft set nut | 289 | 2,950 | 213 |
| Differential carrier set nut: Front side Rear side | 123 | 1,250 | 90 |
| Differential carrier set nut: Rear side | 142 | 1,450 | 105 |
| RR suspension member brace set bolt | 50 | 510 | 37 |
| Body RR end mounting bracket sub-assy x Body: Bolt (A) | 103 | 1,050 | 76 |
| Body RR end mounting bracket sub-assy x Body: Bolt (B) | 69 | 704 | 51 |
| Body RR end mounting bracket sub-assy x Body: Nut | 64 | 551 | 40 |
| RR end body mounting set plate x Body | 56 | 570 | 41 |
| Drain plug | 49 | 500 | 39 |
| Filler plug | 49 | 500 | 39 |
| Breather plug | 21 | 210 | 15 |
| Differential carrier retainer x Differential carrier | 22 | 225 | 16 |
| Companion flange x Drive pinion | 29-12 | ||
| Differential case x Ring gear | 97 | 985 | 71 |
| Differential carrier x Side bearing cap | 79 | 800 | 58 |
| Differential carrier x Differential carrier cover | 47 | 475 | 34 |
| Oil deflector set bolt | 7.0 | 70 | 62in.lbf |
TORQUE SPECIFICATION