Home/Lexus/RX/Lexus RX III (2008-2012)/Repair manual/Wheel Alignment/Alignment / Handling Diagnosis (Service Specifications): Ot…

Contents

Wiring diagrams Section: Wheel Alignment

Alignment / Handling Diagnosis (Preparation)

Wheel Alignment [Inspection & Adjustment]

All sections

Alignment / Handling Diagnosis (Service Specifications): Other Lexus RX III

Wheel Alignment

SERVICE DATA

Model	Front A - B	Rear C - D
2WD	123.6 mm (4.87 in.)	53.7 mm (2.11 in.)
AWD (w/o Air Suspension)	124.6 mm (4.91 in.)	54.9 mm (2.16 in.)
AWD (w/ Air suspension)	120 mm (4.72 in.)	58 mm (2.28 in.)

VEHICLE HEIGHT (UNLOADED VEHICLE)

Measurement points

A: Ground clearance of front wheel center

B: Ground clearance of front lower suspension arm bushing set bolt center

C: Ground clearance of rear wheel center

D: Ground clearance of rear No. 2 lower suspension arm adjust bolt center

	Model	Camber Inclination	Right-left Difference
Front	2WD	0°40' +/- 45' (-0.67° +/- 0.75°)	45' (0.75°) or less
	AWD (w/o Air Suspension)	0°40' +/- 45' (-0.67° +/- 0.75°)
	AWD (w/ Air suspension)	0°38' +/- 45' (-0.63° +/- 0.75°)
Rear	2WD	0°40' +/- 45' (-0.67° +/- 0.75°)
	AWD (w/o Air Suspension)	0°45' +/- 45' (-0.75° +/- 0.75°)
	AWD (w/ Air suspension)	0°49' +/- 45' (-0.82° +/- 0.75°)

CAMBER (UNLOADED VEHICLE)

	Model	Caster Inclination	Right-left Difference
Front	2WD	2°50' +/- 45' (2.83° +/- 0.75°)	45' (0.75°) or less
	AWD (w/o Air Suspension)	2°55' +/- 45' (2.92° +/- 0.75°)
	AWD (w/ Air suspension)	2°53' +/- 45' (2.88° +/- 0.75°)

CASTER (UNLOADED VEHICLE)

	Model	Steering Axis Inclination	Right-left Difference
Front	2WD	10°55' +/- 45' (10.92° +/- 0.75°)	45' (0.75°) or less
	AWD (w/o Air Suspension)	11°00' +/- 45' (11.00° +/- 0.75°)
	AWD (w/ Air suspension)	10°53' +/- 45' (10.88° +/- 0.75°)

STEERING AXIS INCLINATION (UNLOADED VEHICLE)

	Model	Specified Condition
Front	2WD AWD	C + D: 0°05' +/- 10' (0.08° +/- 0.16°)
Front	2WD AWD	B - A: 1.0 +/- 2 mm (0.0394 +/- 0.0787 in.)
Rear	2WD AWD (w/o Air Suspension)	C + D: 0°05' +/- 0°10' (0.08° +/- 0.17°)
	2WD AWD (w/o Air Suspension)	B - A: 1.0 +/- 2.0 mm (0.0394 +/- 0.0787 in.)
	AWD (w/ Air suspension)	C + D: 0°13' +/- 0°10' (0.21° +/- 0.17°)
	AWD (w/ Air suspension)	B - A: 2.5 +/- 2.0 mm (0.0984 +/- 0.0787 in.)

TOE-IN

	Model	Inside Wheel	Outside Wheel Reference
Front	2WD	36°06' +/- 1°30' (36.10° +/- 1.5°)	32°00' (32.00°)
	AWD (w/o Air Suspension)	36°06' +/- 1°30' (36.10° +/- 1.5°)	32°00' (32.00°)
	AWD (w/ Air suspension)	36°14' +/- 1°30' (36.23° +/- 1.5°)	32°04' (32.07°)

WHEEL TURNING ANGLE (UNLOADED VEHICLE)