TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Camshaft oil control valve assembly (for Bank 1) X Cylinder head cover LH | 10 | 102 | 7 |
| Camshaft oil control valve assembly (for Bank 2) X Cylinder head cover RH | 10 | 102 | 7 |
CAMSHAFT TIMING OIL CONTROL VALVE
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Throttle body x Intake manifold | 10 | 102 | 7 |
THROTTLE BODY
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Connector holder block x Body | 8.0 | 82 | 71 in.*lbf |
| ECM x Body | 8.0 | 82 | 71 in.*lbf |
ECM
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Accelerator pedal x Body | 5.4 | 55 | 48 in.*lbf |
ACCELERATOR PEDAL
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Mass air flow meter x Air cleaner cap | 1.7 | 17 | 15 in.*lbf |
MASS AIR FLOW METER
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Camshaft position sensor x Cylinder head cover LH | 10 | 102 | 7 |
| VVT sensor x Cylinder head cover LH | 10 | 102 | 7 |
| VVT sensor x Cylinder head cover RH | 10 | 102 | 7 |
CAMSHAFT POSITION SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Crankshaft position sensor protector x No. 1 oil pan | 10 | 102 | 7 |
| Crankshaft position sensor x No. 1 oil pan | 10 | 102 | 7 |
CRANKSHAFT POSITION SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Spark plug x Cylinder head | 21 | 214 | 15 |
| Ignition coil x Cylinder head cover | 10 | 102 | 7 |
| Water by-pass pipe assembly x cylinder head cover | 18 | 184 | 13 |
| Water by-pass pipe assembly x Automatic transmission | 18 | 184 | 13 |
| Water by-pass pipe assembly x cylinder head cover | 10 | 102 | 7 |
| Water by-pass pipe assembly x Timing chain cover | 10 | 102 | 7 |
IGNITION COIL AND SPARK PLUG
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Engine coolant temperature x Front water by-pass joint | 20 | 200 | 14 |
ENGINE COOLANT TEMPERATURE SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Knock sensor x Cylinder block | 20 | 204 | 15 |
KNOCK SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Air fuel ratio sensor (for Bank 1) x Front No. 2 exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
| Air fuel ratio sensor (for Bank 2) x Front exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
AIR FUEL RATIO SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf |
|---|---|---|---|
| Heated oxygen sensor (for Bank 1) x Front No. 2 exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
| Heated oxygen sensor (for Bank 2) x Front exhaust pipe assembly | 44 (40) | 449 (408) | 32 (30) |
HEATED OXYGEN SENSOR
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Power steering pressure switch x Power feed tube | 21 | 214 | 15 | |
| Front height control sensor sub-assembly x Frame | For bolt | 13 | 127 | 9 |
| Front height control sensor sub-assembly x Front suspension upper arm assembly LH | For nut | 5.6 | 57 | 50 in.*lbf |
POWER STEERING OIL PRESSURE SWITCH
( ): For use with SST