Home ReviewsRefund
Home/Lexus/LX/Lexus LX J100 facelift (2002-2007)/Repair manual/Cooling System (Mechanical)/Cooling System - Mechanical: Other
Contents Wiring diagrams Section: Cooling System (Mechanical) All sections

Cooling System - Mechanical: Other Lexus LX J100 facelift

Cooling System (Mechanical)

COOLING SYSTEM BLEEDING

  1. Ensure engine is cool. Remove radiator cap. Remove 3 drain plugs on engine and radiator, then drain coolant. Close drain plugs.
  2. Slowly add coolant until system is full. Install radiator cap. Start engine, and open heater water valve. Maintain engine speed at 2000-2500 RPM, and warm engine. Stop engine, and allow engine to cool. Top off radiator and then fill reservoir until full. Check system for leaks.

More articles — Cooling System - Mechanical