TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Control Valve Assembly Bearing Guide Nut | 18 (25) |
| Control Valve Housing-To-Steering Rack Housing Bolt | 13 (18) |
| Cylinder End Stopper (1) | 49 (66) |
| Engine Oil Filter Assembly Bolt & Nut With Bracket | 13 (18) |
| Power Steering Gear Assembly-To-Body Bolt | 74 (100) |
| Pressure Tubes-To-Steering Rack (2) | 15 (20) |
| Power Steering Pump Mount Bolt | 13 (17) |
| Power Steering Pump Pressure Port Union-To-Front Housing | 61 (83) |
| Power Steering Pump Pressure Tube Union Banjo Bolt | 42 (56) |
| Power Steering Pump Pulley Nut (3) | 32 (43) |
| Power Steering Pump Rear Housing-To-Front Housing Bolt | 17 (24) |
| Rack End (4) | 56 (76) |
| Rack Guide Spring Cap Lock Nut (5) | 38 (51) |
| Return Tube-To-Steering Gear (6) | 26 (36) |
| Steering Column Intermediate Shaft-To-Steering Rack Input Shaft Bolt | 25 (34) |
| Steering Wheel Set Nut | 25 (34) |
| Tie Rod End-To-Steering Knuckle Nut | 90 (122) |
| Tie Rod End Lock Nut | 41 (55) |
| Tube Clamp Bolts | 13 (18) |
| Tube Support Retainer Bolt | 14 (19) |
| INCH Lbs. (N.m) | |
| Steering Wheel Pad Torx Screw | 78 (8.8) |
| Suction Port Union Bolt | 115 (13) |
| (1) Cylinder end stopper torque specification is for use with special service tool. (Схема №61) (2) Pressure feed tube torque is for use with special tool. (Схема №75) (3) Non-reusable part. Replace nut during installation. (4) Rack end torque is for use with special tool. (Схема №71) (5) Rack guide spring lock nut torque is for use with special tool. (Схема №69) (6) Fluid return tube torque is for use with special tool. (Схема №20) | |
| (1) | Cylinder end stopper torque specification is for use with special service tool. (Схема №61) |
| (2) | Pressure feed tube torque is for use with special tool. (Схема №75) |
| (3) | Non-reusable part. Replace nut during installation. |
| (4) | Rack end torque is for use with special tool. (Схема №71) |
| (5) | Rack guide spring lock nut torque is for use with special tool. (Схема №69) |
| (6) | Fluid return tube torque is for use with special tool. (Схема №20) |
TORQUE SPECIFICATIONS