TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Steering column assembly set bolt and nut | 26 | 265 | 19 |
| Steering shaft universal joint assy x Steering column assembly | 35 | 360 | 26 |
| Steering Intermediate shaft sub-assy x Steering gear assy | 35 | 360 | 26 |
| Steering wheel set nut | 50 | 510 | 37 |
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in..lbf |
| Multiplex tilt & terescopic ECU x Steering column assembly | 1.5 | 15 | 13 in..lbf |
| Tie rod end lock nut | 74 | 750 | 54 |
Torque Specifications
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| VANE PUMP ASSY | |||
| Housing front x Housing rear | 22 | 225 | 16 |
| Pressure feed tube assy joint | 40 (44) | 410 (450) | 30 (33) |
| Pressure feed tube assy set union bolt | 49 | 500 | 36 |
| Pressure port union | 69 | 705 | 51 |
| Suction port union set bolt | 12 | 125 | 9 |
| Vane pump bracket | 30 | 310 | 22 |
| Vane pump assy set bolt | 39 | 400 | 29 |
| Vane pump assy set nut | 43 | 440 | 32 |
| POWER STEERING GEAR ASSY | |||
| Control valve housing x Rack housing | 18 | 185 | 13 |
| Self-locking nut | 59 | 600 | 44 |
| Rack housing cap | 69 | 705 | 51 |
| Rack guide spring cap nut | 50 (69) | 510 (705) | 37(51) |
| Rack end sub-assy x Power steering rack | 95(127) | 970(1.300) | 70 (94) |
| Lower ball joint x Tie rod end assy | 59 | 600 | 44 |
| Tie rod end assy look nut | 56 | 570 | 41 |
| Pressure control valve x Control valve housing | 18 | 185 | 13 |
| Turn pressure tube union nut | 23 (25) | 235 (255) | 17(18) |
| Turn pressure tube union bolt | 34 | 350 | 25 |
| Intermediate shaft x Control valve shaft | 35 | 360 | 26 |
| Pressure feed tube assy union bolt | 49 | 500 | 36 |
| Return tube sub-assy union bolt | 49 | 500 | 36 |
| Sliding w/shaft yoke x Intermediate shaft | 35 | 360 | 26 |
| Power steering gear assy set nut | 118 | 1,205 | 87 |
| Steering wheel set nut | 50 | 510 | 37 |
| Wheel nut | 103 | 1,050 | 76 |
| POWER STEERING ECU ASSY | |||
| Bracket set nut | 5.5 | 56 | 48 in..lbf |
| ( ): For use without SST | |||
Torque Specifications