Home ReviewsRefund
Home/Lexus/LS/Lexus LS III (2000-2003)/Repair manual/Timing Belt/Cooling System Bleeding
Contents Wiring diagrams Section: Timing Belt All sections

Cooling System Bleeding Lexus LS III

Timing Belt
  1. Fill cooling system. Install radiator cap. Move heater control to warmest position. Start engine. Maintain engine speed at 2000-2500 RPM until engine is at normal operating temperature.
  2. Shut engine off. Allow engine to cool. Recheck coolant level. Fill coolant level to FULL line on coolant reservoir if necessary.