TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Brakeline-To-Master Cylinder | 11 (15) |
| Caliper Installation Bolts |
| ES300 & RX300 |
| Front | 87 (118) |
| Rear | 25 (34) |
| GS300, GS430 & IS300 |
| Front | 25 (34) |
| Rear | 77 (104) |
| LS430 |
| Front & Rear | 25 (34) |
| Flexhose-To-Brake Caliper Union Bolt | 22 (30) |
| Push Rod Lock Nut | 18 (25) |
| Sliding Bushing Bolt | 14 (19) |
| Torque Plate Bolts |
| ES300 & RX300 |
| Front | 79 (107) |
| Rear | 34 (47) |
| GS300, GS430, IS300 & LS400 |
| Front | 87 (118) |
| Rear | 77 (104) |
| Wheel Lug Nuts | 76 (103) |
| INCH Lbs. (N.m) |
| Bleeder Screw |
| Except ES300 & RX300 | 96 (11) |
| ES300 & RX300 | 74 (8) |
| Booster Installation Bolts |
| GS300 & GS430 | 8(12) |
| ES300, IS300, LS430 & RX300 | 9 (13) |
| Master Cylinder-To-Power Brake Unit Nuts | 9 (13) |
| Parking Brake Adjustment Lock Nut | 48 (5) |
| Reservoir Set Screw |
| Except LS430 | 16 (2) |
| LS430 | 16 (2) |
| Stopper Bolt (Master Cylinder) |
| ES300 & RX300 | 7 (10) |
| LS430 | 11 (15) |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Brake Pad Thickness |
| ES300 |
| Front |
| Standard | .433 (11.0) |
| Minimum | .039 (1.00) |
| Rear |
| Standard | .394 (10.0) |
| Minimum | .039 (1.0) |
| GS300, GS430 & IS300 |
| Front |
| Standard | .433 (11.0) |
| Minimum | .039 (1.0) |
| Rear |
| Standard | .413 (10.5) |
| Minimum | .039 (1.0) |
| LS430 |
| Front |
| Standard | .433 (11.0) |
| Minimum | .039 (1.0) |
| Rear |
| Standard | .394 (10.0) |
| Minimum | .039 (1.0) |
| RX300 |
| Front |
| Standard | .433 (11) |
| Minimum | .039 (1.0) |
| Rear |
| Standard | .394 (10.0) |
| Minimum | .039 (1.0) |
| Front Disc Rotor |
| ES300, & RX300 |
| Standard Thickness | 1.102 (28.0) |
| Minimum Thickness | 1.024 (26.0) |
| Disc Runout (1) | .002 (.05) |
| GS300, GS430 & IS300 |
| Standard Thickness | 1.26 (32.0) |
| Minimum Thickness | 1.181 (30.0) |
| Disc Runout (1) | .002 (.05) |
| LS430 |
| Standard Thickness | 1.181 (30.0) |
| Minimum Thickness | 1.102 (28.0) |
| Disc Runout (1) | .002 (.05) |
| Rear Disc Rotor |
| ES300 & RX300 |
| Standard Thickness | .394 (10.0) |
| Minimum Thickness | .334 (8.5) |
| Disc Runout (1) | .0059 (.150) |
| GS300, GS430 & IS300 |
| Standard Thickness | .472 (12) |
| Minimum Thickness | .413 (10.5) |
| Disc Runout (1) | .002 (.05) |
| LS430 |
| Standard Thickness | .63 (16.0) |
| Minimum Thickness | .571 (14.5) |
| Disc Runout (1) | .002 (.05) |
| (1) Measured .39" (10.0 mm) from outer edge of rotor. |
| (1) | Measured .39" (10.0 mm) from outer edge of rotor. |
DISC BRAKE SPECIFICATIONS
