TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Center Support Bearing Mounting Bolts | ||
| Except IS300 | 27 (37) | |
| IS300 | 36 (49) | |
| Center Support Bearing & Universal Flange Nut (IS300 & RX300) | (1) | |
| Drive Shaft Adjusting Nut (GS300, GS430 & LS430) | 37 (50) | |
| Drive Shaft-To-Differential (GS300, GS430 & LS430) | 58 (79) | |
| Drive Shaft-To-Intermediate Shaft Bolts (IS300) | 54 (73) | |
| Drive Shaft-To-Flange Bolts (RX300) | 54 (73) | |
| Front Drive Shaft-To-Intermediate Shaft (RX300) | 54 (73) | |
| Front & Rear Center Bearing Mounting Bolts (RX300) | 27 (37) | |
| Front Exhaust Pipe-To-Exhaust Manifold Nut (Except LS430 & RX300) | 32 (43) | |
| Intermediate Shaft-To-Center Support Bearing & Universal Flange (IS300 & RX300) | ||
| Step 1 | 134 (181) | |
| Step 2 | Loosen Nut | |
| Step 3 | 51 (69) | |
| Intermediate Shaft-To-Transmission (LS430) | 58 (79) | |
| Oxygen Sensor | ||
| Except IS300 | 34 (46) | |
| IS300 | 33 (45) | |
| Rear Drive Shaft-To-Rear Differential (RX300) | 55 (75) | |
| Rubber Flexible Coupling-To-Flange Nut | ||
| Except LS430 & RX300 | (2) 59 (80) | |
| INCH Lbs. (N.m) | ||
| Front & Rear Crossmember Brace Bolts | ||
| Except LS430 & RX300 | 108 (12) | |
| LS430 | 115 (113) | |
| Front Floor Center Brace (GS300 & GS430) | 65 (7.3) | |
| Heat Shield Bolts (Except RX300) | 48 (5.4) | |
| (1) Tighten nut to 134 ft. lbs. (182 N.m) to seat bearing. Loosen nut and retighten to 51 ft. lbs. (69 N.m). (2) Install bolts from drive shaft assembly side. | ||
| (1) | Tighten nut to 134 ft. lbs. (182 N.m) to seat bearing. Loosen nut and retighten to 51 ft. lbs. (69 N.m). |
| (2) | Install bolts from drive shaft assembly side. |
TORQUE SPECIFICATIONS