Home ReviewsRefund Car not listed?
Home/Lexus/IS/Lexus IS III (2013-2016)/Repair manual/Lubrication System/Engine Lubrication System (Service Specifications): Other
Contents Wiring diagrams Section: Lubrication System All sections

Engine Lubrication System (Service Specifications): Other Lexus IS III

Lubrication System

OIL PRESSURE

ConditionSpecified Condition
Idle30 kPa (0.3 kgf/cm 2 , 4.4 psi) or more
3000 rpm200 kPa (2.0 kgf/cm 2 , 29 psi) or more

OIL PRESSURE

OIL PRESSURE SWITCH

Tester ConditionConditionSpecified Condition
1 - Body groundEngine stoppedBelow 1 ohms
Engine idling10 kohms or higher

OIL PRESSURE SWITCH

ENGINE OIL LEVEL SENSOR

Tester ConditionConditionSpecified Condition
1 - 2ONBelow 1 ohms
OFF1 kohms or higher

ENGINE OIL LEVEL SENSOR

OIL PUMP

ItemConditionSpecified Condition
Oil pump rotorStandard side clearance0.030 to 0.090 mm (0.00118 to 0.00354 in.)
Maximum side clearance0.090 mm (0.00354 in.)
Standard tip clearance0.060 to 0.160 mm (0.00236 to 0.00630 in.)
Maximum tip clearance0.160 mm (0.00630 in.)
Standard body clearance0.250 to 0.325 mm (0.00984 to 0.0128 in.)
Maximum body clearance0.325 mm (0.0128 in.)

OIL PUMP

STANDARD OIL GRADE

Oil GradeOil Viscosity (SAE)
ILSAC GF-5 multigrade engine oil0W-20

STANDARD OIL GRADE

More articles — Engine Lubrication System (Service Specifications)