CUSTOMIZE PARAMETERS
- CUSTOMIZING FUNCTION WITH TECHSTREAM HINT: The following items can be customized. NOTE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting. Connect the Techstream to the DLC3. Turn the power switch on (IG). Turn the Techstream on. Enter the following menus: Customize Setting / Illuminated Entry. Select the setting by referring to the table below. ILLUMINATED ENTRY Tester Display Default Content Setting Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s I/L when ACC OFF ON Lights up the power switch illumination, front interior lights, rear interior light and scuff plate lights when the power switch is turned from on (ACC or IG) to off. ON or OFF I/L ON W/Door Key Unlock ON Lights up the power switch illumination, front interior lights, rear interior light and scuff plate lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF Room Light when Aprchd ON Lights up the power switch illumination, front interior lights, rear interior light and footwell lights when a key enters any actuation area around the doors. ON or OFF Inside Foot Light ON Lights up the footwell lights illumination. ON or OFF Center Console Spot Light ON Lights up the center console spot light when the power switch is turned on (ACC or IG). ON or OFF Light Control ON Dims (ON setting) or turns off (OFF setting) the footwell lights when all of the following conditions are met: The power switch is on (IG). The shift lever is moved to select a shift state other than park (P). All doors are closed. ON or OFF