CUSTOMIZE PARAMETERS
- CUSTOMIZE AIR CONDITIONING SYSTEM HINT: The following items can be customized. NOTE: When the customer requests a change in a function, first make sure that the function can be customized. Record the current settings before customizing. Customizing with the Techstream Connect the Techstream to the DLC3. Turn the engine switch on (IG). Turn the Techstream on. Enter the following menus: Utility / Customize / Air Conditioner. Select the setting by referring to the table below. Display Default Content Setting Relevant ECU Set Temperature Shift Normal Function to set the temperature shift. +2 C, +1 C, Normal, -1 C or -2 C Air conditioning amplifier assembly Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Automatic or Manual Air conditioning amplifier assembly Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic or Manual Air conditioning amplifier assembly Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON or OFF Air conditioning amplifier assembly Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON or OFF Air conditioning amplifier assembly Button Press Buzzer*1 ON Function to sound a buzzer when a button is pressed. ON or OFF Air conditioning amplifier assembly Emission Gas Sensor Shift*2 Normal Function to change the sensitivity of the exhaust gas sensor. Much More, More, Little More, Normal, Little Less, Less or Much Less Air conditioning amplifier assembly Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air is blown to the foot area. ON or OFF Air conditioning amplifier assembly HINT: *1: This item is displayed even if the vehicle is not equipped with a navigation assembly. Even if the setting is changed, nothing happens because the vehicle does not have the buzzer sounding function. *2: w/ Rear Air Conditioning System Customizing with Multi-display Turn the engine switch on (IG). Select the following menus: Setup / Vehicle / Vehicle Customization. Select the setting by referring to the table below. Display Default Content Setting Relevant ECU Smog Sensor Sensitivity* 0 (middle bar) Function to change the sensitivity of the exhaust gas sensor. +3, +2, +1, 0, -1, -2 or -3 Air conditioning amplifier assembly Auto A/C Mode On Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. On or Off Air conditioning amplifier assembly Efficient Ventilation Mode On Function to automatically change to recirculation mode when the A/C is turned on. On or Off Air conditioning amplifier assembly *: w/ Rear Air Conditioning System