Starting (Service Information): Removal & Installation Lexus GS III facelift

INSTALLATION

1. INSTALL ENGINE SWITCH Attach the 2 claws to install the switch. Connect the switch connector.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY . Refer to «INSTALLATION - Step 1»(ref-382579-S10958456542011012800000)
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY . Refer to «INSTALLATION - Step 11»(ref-382759-S35541172152011012800000)
4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY . Refer to «INSTALLATION - Step 10»(ref-382759-S35541172152011012800000)
5. INSTALL INSTRUMENT SIDE PANEL LH . Refer to «INSTALLATION - Step 12»(ref-382759-S35541172152011012800000)
6. INSTALL FRONT DOOR OPENING TRIM COVER LH . Refer to «INSTALLATION - Step 27»(ref-382776-S01383211072011012800000)
7. INSTALL FRONT DOOR SCUFF PLATE LH . Refer to «INSTALLATION - Step 29»(ref-382776-S01383211072011012800000)
8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH . Refer to «INSTALLATION - Step 19»(ref-382759-S35541172152011012800000)
9. INSTALL FRONT CONSOLE UPPER PANEL ASSEMBLY . Refer to «INSTALLATION - Step 21»(ref-382759-S35541172152011012800000)
10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH . Refer to «INSTALLATION - Step 22»(ref-382759-S35541172152011012800000)
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION Perform initialization, refer to «INITIALIZATION»(ref-382578-S40254115562011012800000) . NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
13. CHECK SRS WARNING LIGHT Check the SRS warning light, refer to «DIAGNOSIS SYSTEM»(ref-382572-S06363197962011012800000) .