Motor Operation
Disconnect wiper angle motor connector. Connect a jumper wire between positive battery terminal and terminal No. 5. (Схема №4) Connect another jumper wire between ground and terminal No. 6. Replace motor if it does not operate.
Low-Speed Test
Disconnect wiper motor connector. Connect jumper wire between battery positive terminal and terminal No. 3 of wiper motor connector. (Схема №1) Ground terminal No. 1. Wiper motor should operate at low speed.
High-Speed Test
Disconnect wiper motor connector. Connect jumper wire between battery positive terminal and terminal No. 2 of wiper motor connector. (Схема №1) Ground terminal No. 1. Wiper motor should operate at high speed.