Introduction: Other Lexus ES XV40

CUSTOMIZE PARAMETERS

1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM TILT & TELESCO: TILT & TELESCO SPECIFICATIONS DISPLAY DEFAULT CONTENTS SETTING AUTO TILT AWAY ON ON/OFF of the auto away / return function ON/OFF
2. AIR CONDITIONING SYSTEM AIR CONDITIONER (AUTO A/C): AIR CONDITIONING SYSTEM SPECIFICATIONS DISPLAY (ITEM) DEFAULT CONTENTS SETTING SET TEMP SHIFT (Set Temperature Shift) NORMAL To shift the temperature against the displayed temperature +2 C / +1 C / NORMAL 1 AC 1-2 C AIR INLET MODE (Air Inlet Mode) AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode MANUAL/AUTO COMPRESSOR MODE (Compressor Mode) AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF MANUAL/AUTO COMPRS / DEF OPER (Compressor / Air Inlet DEF Operation) LINK Function to turn the A/C ON automatically linked with the FRONT DEF button when the A/C is OFF NORMAL / LINK EVAP CTRL (Evaporator Control) AUTO Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up MANUAL/AUTO GAS SENS SHIF (Emission Gas Sensor Shift) NORMAL Function to change the sensitivity of the exhaust gas sensor MU MORE / MORE / LI MORE / NORMAL / LI LESS / LESS / MU LESS BUTTON PRS BUZ ON Function to sound a buzzer when a button is pressed OFF / ON FOOT/DEF MODE (Foot / DEF Auto Mode) ON Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON OFF/ON AUTO BLOW UP (Foot / DEF Automatic Blower Up Function) ON Function to change the blower level automatically when the defroster is ON OFF/ON AMBIENT TMP SFT (Ambient Temperature Shift) NORMAL Function to shift the ambient temperature against the displayed ambient temperature +3C/+2C/+1 C/NORMAL/-1 C / -2 C / -3 C
3. THEFT DETERRENT SYSTEM THEFT DETERRENT SYSTEM THEFT DETERRENT SYSTEM SPECIFICATIONS DISPLAY (ITEM) DEFAULT CONTENTS SETTING PASSIVE MODE (Passive Arming Mode) OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not in the actuation area and all doors, engine hood and luggage compartment door are closed, even if doors are not locked by wireless or door key lock operation. In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state Unlock any door by key or wireless operation Turn the engine switch on (IG) Open luggage compartment door by wireless operation ON/OFF WARN BY HORN (Warning by horn) ON Function that makes vehicle horn and theft deterrent horn able to be used as a warning device ON/OFF ENTRY DELAY (Entry delay time) 14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s
4. LIGHTING SYSTEM ILLUMINATED ENTRY: ILLUMINATED ENTRY SPECIFICATIONS Display Default Contents Setting LIGHTING TIME 15 s Changes the lighting time of the front seat illumination, rear seat illumination, interior light, rear door courtesy lights, and engine switch illumination after closing the door. It will quickly fade out when the engine switch is turned on (IG). (Front personal switches are OFF, DOOR switch is ON, and seat illumination switch is OFF) 7.5 s/15 s/30 s ILLUMI SYSTEM ON Lights up the footwell illumination when one of the following occurs: the engine switch is turned on (IG), or any door is unlocked or opened. ON / OFF LIGHT CONTROL ON Dims (ON setting) or turns off (OFF setting) the footwell illumination under the following conditions: Engine switch on (IG), shift lever not in P, and all doors closed. ON / OFF I/L ON / UNLOCK ON Lights up the front seat illumination, rear seat illumination, interior light, rear door courtesy lights, footwell illumination, and engine switch illumination when the doors are unlocked. ON / OFF I/LON/ACC OFF ON Lights up the front seat illumination, rear seat illumination, interior light, rear door courtesy lights, and engine switch illumination when the engine switch is turned off. ON / OFF LIGHT CONTROL: LIGHT CONTROL SPECIFICATIONS Display Default Contents Setting LIGHT OFF DELAY 30 s Keeps the exterior lights on for a certain period of time after turning the engine switch off and closing all the doors with the low beam headlights on. OFF / 30 s / 60 s / 90 s SENSITIVITY NORMAL Adjusts the sensitivity of the automatic light control system. LIGHT 2 / LIGHT 1 / NORMAL / DARK 1/DARK 2 DRL FUNCTION (*1) ON ON / OFF of the DRL function ON / OFF DISP EX ON SEN NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT 2 / LIGHT 1 / NORMAL / DARK 1/DARK 2 DISP EX OFF SEN NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT 2 / LIGHT 1 / NORMAL / DARK 1/DARK 2 HINT: *1: for U.S.A package models.
5. POWER DOOR LOCK CONTROL SYSTEM DOOR LOCK: DOOR LOCK SPECIFICATIONS Display (Item) Default Contents Setting AUTO UNLK/SHIFT (Unlock w/engine switch on (IG), shift P, speed 0 km/h (0 mph)) ON Function that unlocks doors when the shift lever is moved to the P position from any other position while the engine switch is on (IG) ON/OFF ALL UNLK/OPN-CL (All unlock w/D door open-close) OFF Function that unlocks all other doors when opening driver side door within 10 seconds after turning the engine switch off from on (IG) ON/OFF UNLK/KEY TWICE (Unlock w/2 times D key operation) ON Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice In the OFF setting, turning it once unlocks all doors ON/OFF AUTO LOCK/SHIFT (Auto lock/shift not P) ON Function that locks doors when the shift lever is moved from the P position to any other position ON/OFF AUTO LOCK OFF Function that locks doors when vehicle reaches a vehicle speed 20 km/h (13 mph) ON/OFF WIRELESS D LOCK: WIRELESS D LOCK SPECIFICATIONS Display (Item) Default Contents Setting AUTO LOCK DELAY 60s Function that selects AUTO LOCK time (30 sec. or 60 sec.) 30s/60s
6. WIRELESS DOOR LOCK CONTROL SYSTEM WIRELESS DOOR LOCK CONTROL SYSTEM WIRELESS DOOR LOCK CONTROL SYSTEM SPECIFICATIONS Display (item) Default Function Setting WIRELESS OPER (Wireless door lock control function) ON Function that turns wireless door lock function ON/OFF ON/OFF HAZARD ANS BACK (Hazard answer-back for wireless door lock control) ON When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice. ON/OFF OPEN DOOR WARN (Door ajar warning) ON The buzzer sounds when LOCK is pressed when any of the doors are ajar. ON/OFF AUTO LOCK DELAY (Auto lock time) 60s This function regulates the interval between unlocking and automatic relocking of doors. 30 s/60 s UNLOCK/2OPER (Wireless unlock operated twice) ON This function unlocks the driver's door when the UNLOCK switch is pressed once, and unlocks all doors when pressed twice within 3 seconds. If set to OFF, pressing UNLOCK once unlocks all doors. ON/OFF ALARM FUNCTION (Panic function) ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 seconds. ON/OFF WIRELS BUZZ VOL (Wireless buzzer volume) LEVEL7 This function adjusts the volume of the wireless buzzer. LEVEL0 to LEVEL7 TRUNK LID OPER (Wireless trunk opener function setting) 0.8 s PR ON This function changes operation method of transmitter to open luggage compartment door. 1 TIME: Push 1 time 2 TIMES: Push 2 times 0.8 s PR: Push and hold for 0.8 seconds OFF: Does not operate 1 TIME/2 TIMES/0.8 s PR/OFF
7. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (DOOR LOCK) SMART: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (DOOR LOCK) SPECIFICATIONS Display (Item) Default Contents Setting PARK WAIT TIME (Wait time to permit opening door after locking) 2.5s Function that sets waiting time to permit opening door after door is locked with entry lock function. 0.5s/1.5s/2.5s/5.0s SMART UNLOCK D_DOOR Function that switches the entry unlock detection area. ALL/EACH D_DOOR IGNITION AREA (SMART ignition available area) ALL Function to choose the available area for electrical key to start E/G and cancel the steering lock. FRONT/ALL TRUNK OPEN MODE (Luggage compartment opening operation) ON Function to open a luggage compartment when the driver has the electrical key and presses the luggage open button. ON / OFF WIRELESS DOOR LOCK: WIRELESS DOOR LOCK SPECIFICATIONS Display (Item) Default Contents Setting ALARM FUNCTION (Panic function) ON Function to operate the theft deterrent system by keeping pressing the lock button of the transmitter for 2.5 seconds. If there is a panic button, press the panic button instead of the lock button. ON / OFF WIRELS BUZZ VOL Level 7 Function to adjust the volume of the wireless door lock buzzer. Level0/1/2/3/4/5/6/7 WARNING: WIRELESS BUZZ VOL SPECIFICATIONS Display (Item) Default Contents Setting KEY LOW-BATT WRN ON Function to set a warning function for the time when a key battery becomes weak. ON / OFF
8. METER/GAUGE SYSTEM METER: METER/GAUGE SYSTEM SPECIFICATIONS Display (Item) Default Contents Setting SEAT-BELT WARN D/P ON Function to change the setting of the seat belt buzzer. D/P ON, D ON, P ON, D/P OFF
9. INTUITIVE PARK ASSIST SYSTEM Warning INTUITIVE PARK ASSIST SYSTEM SPECIFICATIONS DISPLAY DEFAULT CONTENTS SETTING RR SENSOR RANGE Wide Function to set buzzer activation range (for rear center sensors) NARROW/WIDE KEEP SENSE BUZ AVAIL Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds NOT AVAIL/AVAIL F & R BUZZER VOLM M2 Function to change volume of buzzer L/M1/M2/M3/H Sensor: SENSOR SPECIFICATIONS DISPLAY DEFAULT CONTENTS SETTING SENSOR COND/N AVAIL Function to make sensors available when shift position is N NOT AVAIL/AVAIL Display: DISPLAY SPECIFICATIONS DISPLAY DEFAULT CONTENTS SETTING DISPLAY MODE ALL Function to change display mode ALL/UNDISP
10. POWER MIRROR CONTROL SYSTEM (WITH MEMORY) MIRROR MIRROR SPECIFICATIONS DISPLAY (ITEM) DEFAULT CONTENTS CONTENTS SETTING Foot Light T ON(15 seconds)/OFF Function to set how long the outer foot light stays on. 001 (7.5 seconds) 010 (15 seconds) 011 (30 seconds) 100 (Off)
11. REAR SUNSHADE SYSTEM OTHERS REAR SUNSHADE SYSTEM SPECIFICATIONS System Default Contents Selection R OUTPUT TIME 0.7 sec. Function to change the time before reverse-linked sunshade lowering function is activated 0/0.7/0.9/1.2 R-SHADE REVERSE AVAIL NOT AVL/AVAIL of the rear sunshade reverse function NOT AVL/AVAIL
12. SLIDING ROOF SYSTEM Sliding roof ECU SLIDING ROOF SYSTEM SPECIFICATIONS Display (Item) Default Contents Setting OPEN/DOOR KEY (Door key related OPEN) ON Function to manually open sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to unlock position when engine switch is off ON/OFF CLOSE/DOOR KEY (Door key related CLOSE) ON Function to manually close sliding roof linked with power window if holding driver's side and passenger's side door key for 1.5 seconds or more to lock position when engine switch is off ON/OFF OPEN/WIRELESS (Wireless key related OPEN) ON Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 2.4 seconds or more when engine switch is off ON/OFF DOOR HANDLE BTN (Door Handle Lock Button) ON Function to close the sliding roof manually linking the power window if holding the door handle button for 1.5 seconds or more to the lock side when the engine switch is off. ON/OFF DOOR KEY OPER (Door key related operation) SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activated by holding driver's side door key for 1.5 seconds or more to unlock position when engine switch is off TILT/SLIDE WIRELESS OPER (Wireless key related operation) SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activated by pressing on transmitter UNLOCK switch for 2.4 seconds or more when engine switch is off TILT/SLIDE

INITIALIZATION

1. FOR VEHICLES EQUIPPED WITH SMART ACCESS SYSTEM Immediately after the battery terminal is reconnected, the main body ECU will not function, and therefore, the smart access system will not operate. To activate the main body ECU, perform a wireless door unlock or lock operation. If the battery has been discharged, the engine cannot be started even after the battery has been recharged because the steering lock position cannot be recognized correctly. To allow the steering lock ECU to learn the steering lock position, initialize the steering lock ECU. To start the engine after the battery terminal is reconnected, perform the following: Open and close the driver's door. Wait for 10 seconds or more. HINT: The first attempt to start the engine will fail because the steering lock ECU has not learned the steering lock position yet. This does not indicate a malfunction. The engine can be started normally on the second or subsequent attempt.

GLOSSARY OF SAE AND LEXUS TERMS

This glossary lists all SAE-J1930 terms and abbreviations used in this information in compliance with SAE recommendations, as well as their LEXUS equivalents.

GLOSSARY OF SAE AND LEXUS TERMS