REMOVAL & INSTALLATION
| CAUTION | To prevent damage, pry out decorative trim pieces with a plastic tool or a screwdriver with a taped tip. |
Pry switch out of instrument panel. Disconnect electrical connectors. To install, reverse removal procedure.
Disconnect negative battery cable. Pry cover away from upper speaker. Remove screws and upper speaker. Disconnect electrical connector. Remove mirror assembly.
Disconnect negative battery cable. Slide a shop towel between mirror glass and housing. Use shop towel to pull out bottom of mirror (2 clips at bottom of mirror glass secure it to motor assembly). Pull bottom of mirror upward until tabs at top of mirror disengage from motor assembly. To install, reverse removal procedure.
