CUSTOMIZE PARAMETERS
- CUSTOMIZE AIR CONDITIONING SYSTEM HINT: The following items can be customized. NOTE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting. Customizing with the Techstream Connect the Techstream to the DLC3. Turn the power switch on (IG). Turn the Techstream on. Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize Setting. Select the setting by referring to the table below. Display Default Content Setting Relevant ECU Set Temperature Shift Normal Function to control with the shifted temperature against the displayed temperature +2 C, +1 C, Normal, -1 C or -2 C Air conditioning amplifier assembly Compressor Mode Automatic Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly Air Inlet Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on Manual or Automatic Air conditioning amplifier assembly Foot/DEF Auto Mode ON Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on OFF or ON Air conditioning amplifier assembly Foot/DEF Automatic Blow Up Function ON Function to automatically increase the blower level when the defroster is on OFF or ON Air conditioning amplifier assembly Ambient Temperature Shift Normal Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C Air conditioning amplifier assembly ECO MODE Cancel OFF Function to cancel the ECO mode drive when item is on OFF or ON Air conditioning amplifier assembly Noise and Vibration Reduction OFF Function to change speed of the compressor when item is on OFF or ON Air conditioning amplifier assembly Customizing with Multi-display (w/ Navigation System) Turn the power switch on (IG). Select the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings. Select the setting by referring to the table below. Display Default Content Setting Relevant ECU Auto A/C Mode Automatic Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly Efficient Ventilation Mode Automatic Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on Manual or Automatic Air conditioning amplifier assembly Customizing with the combination meter assembly (w/o Navigation System) HINT: Press and hold DISP switch (steering pad switch assembly) when entering an item. Briefly press DISP switch (steering pad switch assembly) when selecting an item. Turn the power switch on (IG). Enter the following menus: Settings / Vehicle Settings. Select the setting by referring to the table below. Display Default Content Setting Relevant ECU Auto A/C Mode Automatic Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off Manual or Automatic Air conditioning amplifier assembly Press and hold DISP switch (steering pad switch assembly). The setting completion screen will be displayed. Return to the item selection screen.
INITIALIZATION
- INITIALIZE SERVO MOTOR Turn the power switch off. Connect the Techstream to the DLC3. Turn the power switch on (IG). Press the A/C OFF switch. Turn the Techstream on. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization. According to the Techstream display, select the "Next" switch. According to the Techstream display, select the "Next" switch. HINT: During the initialization, A/C AUTO indicator light comes on, and goes off when the initialization has finished. According to the Techstream display, select the "Exit" switch to finish the initialization.