SENSOR - ACCELERATOR PEDAL POSITION (APP) Land Rover Range Rover L322

SENSOR - ACCELERATOR PEDAL POSITION (APP)

Note. Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed. See ELECTRICAL PRECAUTIONS .

Note. The Accelerator Pedal Position (APP) sensor is not serviced separately from the throttle pedal.

1. Disconnect battery earth lead.
2. Remove cap from screw and remove Allen screw securing throttle pedal. (Scheme 30)
3. Release pedal from bracket, disconnect multiplug from APP sensor and remove pedal.

Scheme 30

1. Position throttle pedal and connect multiplug to APP sensor.
2. Fit pedal to bracket, tighten Allen screw to 10 Nm (7 ft. lbs) and fit cap to screw.
3. Connect battery earth lead.
4. If a replacement sensor has been fitted, re-set adaptions using TestBook/T4.