SPECIFICATIONS
| Item | Specification |
|---|
| * Recommended oil | Shell TF 0753 |
| Capacity - Wet and dry fill | 1.5 liters, (2.6 pints) (1.5 US quarts) |
| Input shaft splines grease | Weicon TL7391 |
| CAUTION | * Do not use any lubricant other than that specified |
| Item | Specification |
|---|
| Make | Magna Steyr |
| Model | DD295 |
| Type | Two speed, permanent four wheel drive transfer box having synchronized shift on the move facility with an actively controlled wet clutch and 50/50 torque split across the center differential |
| Clutch type | Wet, multi-plate |
| Maximum torque capacity | 2500 Nm (1842.5 lb-ft) |
| Ratios | |
| High | 1:1 |
| Low | 2.93:1 |
| Maximum shift speeds | |
| High to low ratio | 40 kph (24.8 mph) |
| Low to high ratio | 60 kph (37.2 mph) |
| Description | Nm |
|---|
| Transfer case fluid drain plug | 22 |
| Transfer case fluid filler/level plug | 22 |
| Transmission support insulator to transfer case bolts | 60 |
| Transfer case to transmission bolts | 45 |
| * Front driveshaft to transfer case output flange | |
| Stage 1 | 45 |
| Stage 2 | Further 90° |
* New 'patched' Torx bolts must be installed
