Home ReviewsRefund
Home/Land Rover/Range Rover/Land Rover Range Rover III (2002-2005)/Repair manual/Mechanical/Engine Oil Pressure Check
Contents Wiring diagrams Section: Mechanical All sections

Engine Oil Pressure Check Land Rover Range Rover III

Mechanical 1 illustration ~279 words

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed. See BATTERY DISCONNECT & RECONNECT .

Check

  1. Disconnect battery earth lead. See «BATTERY DISCONNECT & RECONNECT»(/land-rover/range-rover/iii-2002-2005/remont/charging-system/#generators-regulators__battery-disconnect-reconnect).
  2. Remove oil pressure switch. See «SWITCH - OIL PRESSURE»(ref-158804-S40301079552005013100000).
  3. Fit LRT-12-052/10 to oil filter housing and fit LRT-12-052C to LRT-12-052/10, tighten unions. (Scheme 1)
  4. Check engine oil level, top-up if necessary.
  5. Connect battery earth lead. See «BATTERY DISCONNECT & RECONNECT»(/land-rover/range-rover/iii-2002-2005/remont/charging-system/#generators-regulators__battery-disconnect-reconnect).
  6. Start and run engine until normal operating temperature is reached.
  7. Note oil pressure readings with the engine running at idle and at 3500 rev/min.
  8. Switch off engine.
  9. Disconnect battery earth lead. See «BATTERY DISCONNECT & RECONNECT»(/land-rover/range-rover/iii-2002-2005/remont/charging-system/#generators-regulators__battery-disconnect-reconnect).
  10. Remove LRT-12-052C.
  11. Remove LRT-12-052/10.
  12. Clean oil spillage.
  13. Fit oil pressure switch. See «SWITCH - OIL PRESSURE»(ref-158804-S40301079552005013100000).
  14. Check engine oil level, top-up if necessary.
  15. Connect battery earth lead. See «BATTERY DISCONNECT & RECONNECT»(/land-rover/range-rover/iii-2002-2005/remont/charging-system/#generators-regulators__battery-disconnect-reconnect).

Scheme 1

Scheme 1
Scheme 1

More articles — 4.4L V8