POWER STEERING FLUID RESERVOIR
| CAUTION | To prevent over filling, check/top-up the system with the engine switched off and the system cold. Ensure that the steering wheel is in the straight ahead position, do not turn the steering wheel prior to checking the fluid level. |
- Check that the fluid level is to the mid-way mark between the MAX and MIN marks on the fluid reservoir, top-up if necessary.
- Clean the area around the reservoir filler cap, remove cap.
- If necessary, top-up using the recommended fluid to the mid-way mark on the reservoir. Refer to «Specifications»(ref-531920-S11388913392013022000000) .
- Install the reservoir filler cap.
Scheme 1
Scheme 1: WINDSHIELD WASHER RESERVOIR
- Remove the windshield washer reservoir filler cap.
- Top-up the reservoir using a mixture of an approved windshield washer fluid and water until the level is to the bottom of the gauze filter in the reservoir filler neck.
- Install the reservoir filler cap.
OIL/FLUID LEAKS
- Check for oil/fluid leaks.
