Home ReviewsRefund
Home/Land Rover/Freelander/Land Rover Freelander L359 (2010-2012)/Repair manual/Ignition System/Engine Ignition: Removal & Installation
Contents Wiring diagrams Section: Ignition System All sections

Engine Ignition: Removal & Installation Land Rover Freelander L359

Ignition System 1 illustration

INSTALLATION

  1. Install the ignition coil-on-plugs. Torque: 10 Nm
  2. Connect the ignition coil-on-plug electrical connections.
  3. Install the engine cover. Refer to «ENGINE COVER»(ref-531951-S06303498242013022000000) .
  4. Connect the battery ground cable. Refer to «SPECIFICATIONS»(ref-531959-S27829531522013022000000) .

Scheme 4

Scheme 4: REMOVAL
Scheme 4: REMOVAL
  1. Disconnect the battery ground cable. Refer to «SPECIFICATIONS»(ref-531959-S27829531522013022000000) .
  2. Remove the ignition coil-on-plugs. See «IGNITION COIL-ON-PLUG»(ref-531972-S29676214472013022000000) .
  3. Torque: 28 Nm
  1. To install, reverse the removal procedure.

More articles — Engine Ignition