General
The front and rear electrically operated windows are opened and closed by using the non-latching switches mounted on each door trim casing. All windows can also be controlled from the drivers door switch pack when the 'ignition' switch is in the 'ignition' position. The drivers door switch pack also contains the rear window inhibit switches.
Note. When the ignition is switched off, the windows will still operate for approximately 40 seconds. This time out sequence will cease as soon as any of the doors are opened. This feature is not active on the tail door window.
The window lift system is controlled by the window lift ECU, which is located within the drivers door switch pack.
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 4 of the engine compartment fuse box (C0632) on an R wire. Fusible link 4 (C0574) provides a constant battery feed to the following on an NW wire
- The time out relay.
- Fuse 32.
- Fuse 33.
- Fuse 35.
- The Central Control Unit (CCU).
All are located in the engine compartment fuse box (C0587).
Fusible link 3 (C0571) is connected to the ignition switch (C0028) by an N wire. When the 'ignition' switch is turned to the 'ignition' position, current flows across the switch (C0028) to fuse 18 of the passenger compartment fuse box (C0588) on a G wire. Fuse 18 provides an ignition feed to the CCU (C0593).