General
Certain markets are fitted with folding door mirrors. The door mirrors can be moved to their folded position by rotating the mirror switch to the center position, then moving the switch downwards. Moving the switch downwards a second time returns the mirrors to their original position.
For more information on door mirror operation, refer to DOOR MIRRORS .
Feed from the positive battery terminal (C0192) is supplied to fusible link 3 and fusible link 4 of the passenger compartment fuse box (C0632) on an R wire. Fusible link 4 (C0574) provides a feed to the time-out relay and fuse 16 of the passenger compartment fuse box (C0587) on an NW wire. Operation of the time-out relay is controlled by the Central Control Unit (CCU) (C0592).
Folding Mirror ECU
Fuse 16 of the passenger compartment fuse box (C0580) provides a constant battery feed to the folding mirror ECU (C0907) on a P then NS wire. The folding mirror ECU is located at the base of the passenger side 'A' post, and is earthed on a B wire.
The folding mirror ECU (C0907) monitors the condition of the door mirror switch (C0066) on a UB wire. When the switch is pressed, a momentary earth path is created on a B wire via the door mirror switch (C0066) and the passenger compartment fuse box (C0589 & C0587) on a B wire. When the folding mirror ECU senses this earth, it powers both folding mirror motors.
When the folding mirror ECU senses the door mirror switch has been pressed, it provides a feed to the LH folding mirror motor (C0444) on a Y then R wire, and the RH folding mirror motor (C0444) on a Y then B wire. Current flows across the motors (C0444) and back to the folding mirror ECU on a B then O wire (LH) and an R then O wire (RH).
See also:
• DOOR MIRRORS