| A/C Compressor Mounting Bolts | 18 (25) |
| Anti-Roll Bar Saddle Clamp Bolts | 17 (23) |
| Axle Shaft Hub Nut | 295 (400) |
| Caliper-To-Brake Disc Bolts | 74 (100) |
| Catalytic Converter-To-Manifold Nuts | 37 (50) |
| Cylinder Block Drain Plug (1) | 15 (20) |
| Drive Shaft-To-IRD Flange Bolts | 30 (40) |
| Drive Shaft-To-Viscous Coupling Nuts & Bolts | 48 (65) |
| Drive Shaft-To-IRD Flange Nuts & Bolts | 30 (40) |
| Engine Lower Steady-To-Bracket Bolt | 74 (100) |
| Exhaust Heatshield-To-Exhaust Mounting Bracket | 33 (45) |
| Exhaust Heatshield-To-IRD Nut | 33 (45) |
| Front Drive Shaft-To-IRD Flange Bolts & Nuts | 30 (40) |
| Front Drive Shaft-To-Viscous Coupling Bolt | 48 (65) |
| Hub-To-Damper Bolts | 150 (205) |
| Intermediate Pipe Flange Nuts | 44 (60) |
| IRD Drain Plug | 33 (45) |
| IRD End Cover Bolts (1) | 22 (30) |
| IRD Fill/Level Plug | 26 (35) |
| IRD Pinion Housing Nuts | 18 (25) |
| IRD Pinion Nut | 111 (150) |
| IRD Support Bracket-To-Engine | 37 (50) |
| IRD Support Bracket-To-IRD Bolts | 37 (50) |
| IRD Support Bracket-To-Sump | 65 (88) |
| IRD Unit-To-Transmission Bolts | 66 (90) |
| Lower Arm Front Bushing Bolts | 140 (190) |
| Lower Arm Rear Bushing Housing Bolts | 77 (105) |
| Lower Arm Rear Bushing Nuts | 103 (140) |
| Lower Engine Steady-To-IRD Support Bracket Bolts | 74 (100) |
| Manifold Heatshield-To-IRD Support Bracket Bolts | 18 (25) |
| Manifold Heatshield-To-Pinion Housing Nut | 33 (45) |
| Parking Brake Cable Clip-To-Subframe Bolt | 16 (22) |
| Rear Beam-To-Body Bolts | 140 (190) |
| Rear Differential Filler/Level Plug | 20 (27) |
| Rear Differential Flange-To-Drive Shaft Nuts & Bolt | 48 (65) |
| Rear Differential Front Mounting Bushing-To-Subframe Bolt | 89 (120) |
| Rear Differential Housing Cover Bolts | 18 (25) |
| Rear Differential Pinion Nut (2) (3) | 140 (190) |
| Rear Differential-To-Front Mounting Bolts | 48 (65) |
| Rear Differential-To-Rear Mounting Bolts | 48 (65) |
| Tail Pipe Clamp Nut | 41 (55) |
| Left Exhaust Manifold Nuts-To-Cylinder Head | 33 (45) |
| Left Exhaust Manifold Nuts-To-Front Pipe | 37 (50) |
| Trailing Link-To-Rear Hub Nut & Bolt | 89 (120) |
| Transmission Level Plug | 10 (14) |
| Transverse Link (Adjustable)-To-Subframe Nut & Bolt (4) | 89 (120) |
| Transverse Link (Fixed)-To-Subframe Nut & Bolt (4) | 89 (120) |
| Rear Differential Oil Plug | 20 (27) |
| Viscous Coupling Support Bearing Bolts | 21 (28) |
| Wheel Lug Nut | 85 (115) |
| INCH Lbs. (N.m) |
| Breather Pipe Bracket Screw | 80 (9) |
| Heatshield Bolts | 89 (10) |
| Manifold Heatshield-To-IRD Support Bracket Bolts | 80 (9) |
| (1) Apply sealant, Part No. STC 50552 to threads. (2) DO NOT reuse old nut or bolt. (3) Continue to tighten pinion nut until pinion preload torque-to-turn is 15.0-24.8 INCH Lbs. (1.7-2.8 N.m). If pinion preload is higher, replace collapsible spacer. DO NOT tighten pinion nut to more than 275 Ft. Lbs. (373 N.m), or collapsible spacer will be compressed too far. (4) Tighten with weight of vehicle on suspension. |
