| Application | Specification | |
|---|---|---|
| Compressor Type | NA | |
| Compressor Belt Tension | (1) | |
| System Oil Capacity (2) | ||
| Without Rear A/C | 6.3 fl. ounces | |
| With Rear A/C | 6.3 fl. ounces | |
| Refrigerant (R-134a) Capacity | ||
| Without Rear A/C | 23.7-25.3 Ounces | |
| With Rear A/C | 32 Ounces | |
| System Operating Pressure | ||
| High Side | NA | |
| Low Side | NA | |
| (1) Belt tension is maintained by an automatic belt tensioner. (2) Use Nippondenso ND-OIL 8 refrigerant oil. | ||
| (1) | Belt tension is maintained by an automatic belt tensioner. |
| (2) | Use Nippondenso ND-OIL 8 refrigerant oil. |
SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Blower Motor | 14 (19) |
| Compressor bolts | 16 (22) |
| Compressor to mounting bracket bolts | 18 (25) |
| Evaporator assembly to body bolts | 12 (16) |
| Evaporator pipe to TXV valve | 24 (32) |
| Fuel burning heater Torx bolts | 18 (25) |
| Heater assembly | 12 (16) |
| TX valve pressure pipe union | 16 (22) |
| INCH Lbs. | |
| Adaptor block to receiver drier bolt | 44 (5) |
| A/C Pipes-To-Compressor Bolts | 88 (10) |
| Air conditioning pipes to receiver drier bolts | 44 (5) |
| Condenser pipe bolt | 44 (5) |
| Dual pressure switch to receiver drier | 88 (10) |
| Evaporator pipe bolts | 44 (5) |
| High and low pressure pipe, bolts | 88 (10) |
| Receiver drier to bracket bolts | 44 (5) |
TORQUE SPECIFICATIONS