Home ReviewsRefund
Home/Land Rover/Discovery/Land Rover Discovery III (2004-2009)/Repair manual/Mechanical/Reassembly: Overview
Contents Wiring diagrams Section: Mechanical All sections

Reassembly: Overview Land Rover Discovery III

Mechanical ~104 words
  1. Clean timing chain and gears and gear locations.
  2. Fit key to crankshaft.
  3. Temporarily fit gears to camshaft and crankshaft. If necessary, rotate shafts to align timing marks. When aligned correctly, the timing marks will face each other; crankshaft gear timing mark at twelve o'clock position and camshaft gear timing mark at six o'clock position. (Схема №128)
  4. Remove gears from shafts and fit to timing chain.
  5. With timing marks aligned, fit timing chain and gears as an assembly.
  6. Restrain the camshaft gear and tighten retaining bolt to 50 N.m (37 ft. lbs).
  7. Fit timing gear cover gasket. See «SEAL - TIMING GEAR COVER»(ref-158799-S35488350162005013100000).

More articles — Reassembly