Home/Land Rover/Discovery/Land Rover Discovery II (1998-2004)/Repair manual/Engine Control Systems/Engine, Ignition System, & Fuel System Sensors & Switches: …
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine, Ignition System, & Fuel System Sensors & Switches: Specifications Land Rover Discovery II

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Discovery Series II
Coolant Rail Bolts16 (22)
Cylinder Block Coolant Drain Plug22 (30)
Fuel Pump Assembly Lock Ring26 (35)
HO2S (Front & Rear)33 (45)
Knock Sensor16 (22)
Lower Intake Manifold Bolts
Initial96 in lbs ()
Final38 (52)
Lower Intake Manifold Gasket Clamp Bolts16 (22)
SAI Union Nuts18 (24)
Third Row Seat Belt Mounting Bolt37 (50)
Third Row Seat Mounting Nuts & Bolts16 (22)
Upper Intake Manifold Bolts16 (22)
Viscous Fan Nut33 (45)
Freelander
Cylinder Block Coolant Drain Plug15 (20)
ECT Sensor13 (18)
Fuel Pump Assembly Lock Ring26 (35)
HO2S (Front & Rear)40 (54)
Left & Right Intake Manifold Bolts-To-Cylinder Head18 (24)
Thermostat Housing Flange Bolt13 (18)
Upper Intake Manifold Bolts13 (18)
Range Rover
ECT Sensor15 (20)
Fan-To-Coupling Bolts18 (24)
Fuel Line Union At Fuel Filter15 (20)
Fuel Line Union At Fuel Rail12 (16)
Fuel Pump Assembly Lock Ring26 (35)
HO2S
Front33 (45)
Rear15 (20)
Knock Sensor12 (16)
SAI Union Nuts18 (24)
INCH Lbs. (N.m)
Discovery Series II
CKP Sensor Bolt53 (6)
CMP Sensor Bolt72 (8)
ECT Sensor84 (10)
Fuel Rail Bolt72 (8)
Ignition Coil Bolt72 (8)
Freelander
CKP Sensor Bolt78 (9)
CMP Sensor Bolt72 (8)
Fuel Rail Bolts84 (10)
Range Rover
CKP Sensor Bolt72 (8)
CMP Sensor Bolt72 (8)
IAT Sensor Bolt72 (8)
Radiator Drain Plug48 (5)

TORQUE SPECIFICATIONS