Home/Kia/Sportage/Kia Sportage II (2004-2008)/Repair manual/Brake System/VOLTAGE LIMITS

Contents

Wiring diagrams Section: Brake System

SERVICE STANDARD

BRAKE SWITCH CLEARANCE

WHEEL SENSOR SIGNAL PROCESSING

SOLENOID VALVE CONTROL

VOLTAGE LIMITS

PUMP MOTOR CHECKING

ABS WARNING LAMP MODULE

EBD WARNING LAMP / PARKING BRAKE LAMP MODULE

TCS WARNING LAMP (TCS SYSTEM)

TCS FUNCTION LAMP (TCS SYSTEM)

TCS ON/OFF SWITCH (TCS SYSTEM)

TRACTION CONTROL SYSTEM (TCS); FUNCTION

BRAKE TRACTION CONTROL SYSTEM (BTCS)

ABS/TCS CONNECTOR; INPUT/OUTPUT

Even After The Engine Is Started, The ABS Warning Lamp Remains ON.

Brake Warning Lamp Is Abnormal

FAILSAFE FUNCTION

ADVANTAGES

EBD WARNING LAMP MODULE

ESP WARNING LAMP (ESP SYSTEM)

ESP FUNCTION LAMP (ESP SYSTEM)

ESP ON/OFF SWITCH (ESP SYSTEM)

ESP CONNECTOR INPUT/OUTPUT

MEMORY OF FAIL CODE

FAILURE CHECKUP

COUNTERMEASURES IN FAIL

WARNING LAMP ON

All sections

VOLTAGE LIMITS Kia Sportage II

Brake System

VOLTAGE LIMITS

Overvoltage When overvoltage is detected (above 16V), the ECU switches off the valve relay and shuts down the system. When voltage is returned to operating range, the system goes back to the normal condition after the initialization phase.
Undervoltage In the event of undervoltage (below 10V), ABS control shall be inhibited and the warning lamp shall be turned on. When voltage is returned to operating range, the warning lamp is switched off and ECU returns to normal operating mode.