FUSE INSPECTION
- Be sure there is no play in the fuse holders, and that the fuses are held securely.
- Are the fuse capacities for each circuit correct?
- Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.
Scheme 1
If the ALT fuse is blown, it must be removed as follows
- Disconnect the negative battery cable.
- Remove the screws shown in the illustration above.
- Replace the fuse with a new one of the same rating.
- Reinstall in the reverse order of removal.
Note. If the ALT fuse is blown, further diagnostics of the charging system may be required.