A/c Compressor Servicing: Removal & Installation — A/c Compressor Servicing — General Servicing - All Makes

A/c Compressor Servicing: Removal & Installation Kia Sephia I facelift

Removal

Using clutch disc/plate holder, remove clutch disc/plate bolt. Using puller and forcing screw, remove clutch disc/plate. (Схема №1)or (Схема №2).
Remove shim(s) and snap ring. On DKV-14D compressor, use pulley puller pilot to protect compressor shaft. On all models, use a puller to remove pulley. Remove screw for clutch coil lead. Remove 3 clutch coil screws and clutch coil.

To install, reverse removal procedure. Align clutch coil pin with hole in front head of compressor and install clutch coil. Tighten clutch coil screws to 44 INCH lbs. (5 N.m). Using pulley installer and drive handle, tap pulley onto compressor. On all models, install new snap ring.
On DKV-14D compressor, tighten clutch plate bolt to 113 INCH lbs. (13 N.m) Using feeler gauge, ensure air gap between clutch plate and pulley is 0.012-0.024" (0.30-0.60 mm). If air gap is incorrect, add or remove shim(s) as necessary.