FUEL SYSTEM
| WARNING | ALWAYS relieve fuel pressure before disconnecting any fuel injection related component. DO NOT allow fuel to contact engine or electrical components. |
1.6L, 1.8L
To release fuel pressure, remove rear seat cushion. Disconnect fuel pump connector. Start and run engine until it stalls. Turn ignition off. When testing or repair is complete, reconnect fuel pump connector and install rear seat cushion.
Low-pressure side (in-tank filter)
- Remove the fuel pump cover and the fuel pump.
- Remove fuel filter.
High-pressure side
The fuel filter must be replaced at intervals outlined in the maintenance schedule.
| WARNING | Always work away from sparks or open flames. |
- Disconnect the fuel hoses from the fuel filter.
- Remove the fuel filter and bracket.
- Install in the reverse order of removal. NOTE: When installing the filter, push the fuel hoses fully onto the fuel filter.