Home ReviewsRefund Car not listed?
Home/Kia/Sedona/Kia Sedona I (2002-2006)/Repair manual/Automatic Trans/Servicing - A/t: Other
Contents Wiring diagrams Section: Automatic Trans All sections

Servicing - A/t: Other Kia Sedona I

Automatic Trans 2 illustrations

CONTROL CABLE

  1. Move the shift lever to position "N".
  2. Release the adjusting nut at the connection between the transaxle control cable and the manual control lever. Separate the transaxle control cable and the manual control lever. (Scheme 7)
  3. Move the manual control lever to position "N".
  4. Insert a 0.197" (5 mm) pin into the transaxle range switch and the manual control lever hole. (Scheme 8) CAUTION: If the pin is not inserted, position "N" may move when tightening the adjusting nut.

Scheme 7

Scheme 7
Scheme 7

Scheme 8

Scheme 8
Scheme 8

More articles — Servicing - A/t