STARTER SPECIFICATIONS
| Application | Specifications | ||
|---|---|---|---|
| Armature | |||
| Commutator Runout | |||
| Standard | .002" (0.05 mm) | ||
| Limit | .0039" (0.1 mm) | ||
| Commutator Diameter | |||
| Limit | 1.118" (28.4mm) | ||
| Commutator Undercut (Mica) Depth | |||
| Standard | 0.020" (0.5 mm) | ||
| Limit | 0.008" (0.2 mm) | ||
| Brush Length | (1) | ||
| Pinion Gap | .02-.08" (.5-2.0 mm) | ||
| (1) Information is not available from manufacturer. | |||
| (1) | Information is not available from manufacturer. |
STARTER SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Intake Manifold Bracket Bolts | (1) |
| Starter Cable Nut | 9-12 (12-16) |
| Starter Mounting Bolts | 9-12 (12-16) |
| INCH Lbs. (N.m) | |
| Starter Brush Plate Bolts | (1) |
| Starter Rear Cover Bolts | (1) |
| Starter Solenoid Bolts | (1) |
| Transmission Range (TR) Switch Bolt | (1) |
| (1) Information is not available from manufacturer | |
| (1) | Information is not available from manufacturer |
TORQUE SPECIFICATIONS