Home ReviewsRefund Car not listed?
Home/Kia/Rio/Kia Rio III (2011-2015)/Repair manual/Anti-Lock/traction Control/Electronic Stability Control (Esc) System: Wiring
Contents Wiring diagrams Section: Anti-Lock/traction Control All sections

Electronic Stability Control (Esc) System: Wiring Kia Rio III

Anti-Lock/traction Control ~223 words

Check the CAN circuit wiring for ABS warning lamp

  1. Disconnect the instrument cluster connector (M01) and ESC HECU connector, and then turn the ignition switch OFF.
  2. Check for continuity between terminal (M01) 29 of the cluster harness side connector and terminal 26 of ESC HECU harness side. Check for continuity between terminal (M01) 30 of the cluster harness side connector and terminal 14 of ESC HECU harness side. Specification: Below 1ohms
  3. Is resistance within specification? YES Repair short of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module. NO Repair open of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module.
  1. Disconnect the instrument cluster connector (M01) and ESC HECU connector, and then turn the ignition switch OFF.
  2. Check for continuity between terminal (M01) 29 of the cluster harness side connector and terminal 26 of ESC HECU harness side. Check for continuity between terminal (M01) 30 of the cluster harness side connector and terminal 14 of ESC HECU harness side. Specification: Below 1ohms
  3. Is resistance within specification? YES Repair short of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module. NO Repair open of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module.

More articles — Electronic Stability Control (Esc) System