Windshield Wiper/washer: Maintenance Kia Rio II рестайлинг

WASHER FLUID LEVEL SWITCH

1. Remove the washer fluid level switch from the washer reservoir. NOTE: Fluid may flow out of the opening
2. Check for continuity between the No. 1 and No. 2 terminals in each float position. There should be continuity when the float is down. There should be no continuity when the float is up.
3. If the continuity is not as specified, replace the washer fluid level switch.

Scheme 19

Scheme 20

1. Wiper low and wiper high do not work.
2. When washer switch is on, wiper does not work.