General Information: Removal & Installation Kia Rio II рестайлинг

Removal Of Parts

First find the cause of the problem and then determine whether removal or disassembly before starting the job.

Scheme 13

Replacement

Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts. If removed, the following parts should always be replaced with new ones.

Scheme 14

Scheme 15

1. Oil seals
2. Gaskets
3. O-rings
4. Lock washers
5. Cotter pins (split pins)
6. Plastic nuts Depending on their location.
7. Sealant should be applied to gaskets.
8. Oil should be applied to the moving components of parts.
9. Specified oil or grease should be applied to the prescribed locations (oil seals, etc.) before assembly.