SPECIFICATIONS
| Item | Specification |
|---|---|
| Master cylinder | |
| Type | Tandem type |
| I.D. | 22.22 mm (0.875 in) |
| Piston stroke | 29~31 mm |
| Fluid level warning sensor | Provided |
| Proportioning valve (CBS) | |
| Cut-in pressure (Split point) | 30 kg/cm 2 (2.94 MPa, 427 psi) |
| Decompression ratio | 0.27: 1 |
| Brake booster | |
| Type | Vacuum |
| Effective diameter | 254 mm (10 in) |
| Boosting ratio | 7: 1 |
| Front brake (Disc) | |
| Type | Floating type with ventilated disc |
| Disc O.D. | 256 mm (10 in) |
| Disc thickness | 22 mm (0.87 in) |
| Pad thickness | 11 mm (0.43 in) |
| Cylinder type | Single piston |
| Cylinder I.D. | Ø54 mm (2.12 in) |
| Rear brake (Disc) | |
| Type | Floating type with solid disc |
| Disc O.D. | 262 mm (10.3 in) |
| Disc thickness | 10 mm (0.39 in) |
| Pad thickness | 10 mm (0.39 in) |
| Cylinder type | Single piston |
| Cylinder I.D. | 31 mm (1.22 in) |
| Rear brake (Drum) | |
| Type | Leading trailing |
| Drum I.D | 203.2 mm (8 in) |
| Brake lining thickness | 4.3 mm (0.17 in) |
| Clearance adjustment | Automatic |
| Parking brake | |
| Actuation | Mechanical brake acting on rear wheels |
| Type | Lever |
| Drum I.D. | 168 mm (6.61 in) |
GENERAL SPECIFICATIONS
Note. ABS: Anti-lock Brake System CBS: Conventional Brake System
SPECIFICATION(ABS)
| Part | Item | Standard value | Remark |
|---|---|---|---|
| HECU | System | 4 Channel 4 Sensor (Solenoid) | |
| Type | ABS + EBD | ||
| Operating Voltage | 10~16 V | ||
| Operating Temperature | 40~110 °C | ||
| Motor power | 180 W | ||
| Warning lamp | Min. Operating Voltage | 1.2 V | |
| Max. Current consumption | 120 mA | ||
| Active Wheel speed sensor (ABS) | Supply voltage | DC 4.5~20 V | |
| Operating Temperature | 40~150 °C | ||
| Output current low | 5.9~8.4 mA | Typ. 7 mA | |
| Output current high | 11.8~16.8 mA | Typ. 14 mA | |
| Output range | 1~2500 Hz | ||
| Tone wheel | 48 teeth | ||
| Air gap | 0.4~1.5 mm | ||
| Output duty | 30~70 % |
ABS SPECIFICATIONS
TIGHTENING TORQUE
| Item | Nm | Kgf.m |
|---|---|---|
| Master cylinder to booster mounting nut | 7.9~11.8 | 0.8~1.2 |
| Brake booster mounting nut | 12.74~15.68 | 1.3~1.6 |
| Bleeder screw | 5.88~9.8 | 0.6~1.0 |
| Brake tube nut, brake hose | 12.74~16.64 | 1.3~1.7 |
| Caliper guide rod bolt | 21.56~31.36 | 2.2~3.2 |
| Caliper mounting bolt | 83.36~93.16 | 8.5~9.5 |
| Brake pedal member assembly bracket mounting bolt | 7.9~11.8 | 0.8~1.2 |
| Brake pedal mounting nut | 9.8~16.64 | 1.0~1.7 |
| Stop lamp switch mounting nut | 7.9~9.8 | 0.8~1.0 |
| Rear drum brake bleeder screw | 5.88~8.82 | 0.6~0.9 |
| Wheel speed sensor mounting bolt | 8.04~9.51 | 0.82~0.97 |
| HECU mounting bracket bolt | 7.9~9.8 | 0.8~1.0 |
| HECU union screw | 11.76~15.68 | 1.2~1.6 |
| Rear drum backing plate mounting bolt | 9.8~12.74 | 1~1.3 |
| Proportioning valve to master cylinder | 34.3~44.1 | 3.5~4.5 |
TIGHTENING TORQUE SPECIFICATIONS