Removal & Installation
- Disconnect negative battery cable. Remove 4 upper intake manifold support bracket bolts.
- Remove lower intake manifold bracket bolts and bracket. Remove 2 upper starter bolts and a lower bolt. Pull starter from clutch (M/T) or converter (A/T) housing and prop in place. From above, disconnect starter solenoid "S" and "B" terminal connectors. From below, push transmission harness aside and remove starter.
- To install, reverse removal procedure. Rotate starter to provide proper clearance. Tighten all nuts and bolts to specification. See «TORQUE SPECIFICATIONS»(ref-164133-S22030173942004072200000) .