Home ReviewsRefund
Home/Kia/Optima/Kia Optima III рестайлинг (2013-2015)/Repair manual/Wheel & Tire System/Tires/wheels/wheel Alignment - Optima: Specifications
Contents Section: Wheel & Tire System All sections

Tires/wheels/wheel Alignment - Optima: Specifications Kia Optima III рестайлинг

Wheel & Tire System 2 illustrations

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque

88.3 ~ 107.9 N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6 lb-ft)

Scheme 109

Scheme 109: Hub Nut Tightening Sequence
Scheme 109: Hub Nut Tightening Sequence
CAUTIONWhen using an impact gun, final tightening torque should be checked using a torque wrench.

Scheme 110

Scheme 110: Run Out Inspection
Scheme 110: Run Out Inspection
  1. Jack up the vehicle.
  2. Measure the wheel Run-out by using a dial indicator as illustration below. WHEEL RUN-OUT SPECIFICATION TABLE Run-out Aluminum Steel Radial mm (in.) Below 0.3 (0.012) Below 1.4 (0.055) Lateral mm (in.) Below 0.3 (0.012) Below 0.9 (0.035)
  3. If measured value exceeds the standard value, replace the wheel.

More articles — Tires/wheels/wheel Alignment - Optima