Function
- Push the A button lower of the rear view mirror to turn on the function of the compass mirror so that displays a sign of a direction on the small board in the upper-right side of the mirror.
- Push the A button again to turn off its function.
Setting The Compass Zone
This compass must be set to compensate for the variation between true north and magnetic north. To set variation
Scheme 142
- Find your current location and variance zone number on the zone map.
- Press the A button for more than 4 seconds. The current zone number will appear in the display.
- Release and press the A button until the new zone number appears in the display. After you stop pressing the button in, the display will show a compass direction within a few seconds.
Scheme 143
| WARNING | Do not install the ski rack, antenna, etc. which are attached to the vehicle by means of a magnet. They affect the operation of the compass. If the compass deviates from the correct indication soon after repeated adjustment, have the compass checked at an authorized dealer. The compass may not indicate the correct compass point in tunnels or while driving up or down a steep hill. (The compass returns to the correct compass point when the vehicle moves to an area where the geomagnetism is stabilized.) |