SPECIFICATION
| Engine type | 2.4 DOHC | |
|---|---|---|
| Manual transaxle type | M5GF2 | |
| Gear ratio | 1st | 3.267 |
| 2nd | 1.794 | |
| 3rd | 1.552 | |
| 4th | 1.176 | |
| 5th | 0.974 | |
| Reverse | 3.416 | |
| Final gear ratio | 4.333 | |
| 3.250 | ||
| T/M oil capacity( l )* | 1.9 liter(2.0077 US qt, 1.6718 lmp qt) | |
ENGINE SPECIFICATION
TIGHTENING TORQUE
| Item | Nm | Kgf.cm |
|---|---|---|
| Magnetic plug | 29.4-34.3 | 300-350 |
| Shift control cable bracket | 14.8-21.7 | 150-220 |
| Oil filler plug | 29.4-34.3 | 300-350 |
| Idler shaft bolt | 34.3-41.2 | 350-420 |
| Back up lamp switch | 29.4-34.3 | 300-350 |
| Vehicle speed sensor | 7.8-9.8 | 80-100 |
| Transaxle mounting bracket assembly | 59.2-78.9 | 600-800 |
| Transaxle and engine mounting bolt | 42.2-53.9 | 430-550 |
| Cross member mounting | 137.3-156.9 | 1400-1600 |
| Stay mounting | 44.1-58.8 | 450-600 |
| Steering bar tie rod mounting | 23.5-33.3 | 240-340 |
| Stabilizer bar link mounting | 98.1-117.7 | 1000-1200 |
| Lower arm ball joint and folk mounting | 98.1-117.7 | 1000-1200 |
| Lower arm ball joint and front axle mounting | 98.1-117.7 | 1000-1200 |
| Front/rear roll stopper assembly | 49.0-63.7 | 500-650 |
| Steering column bolt | 17.7-24.5 | 180-250 |
| Power steering pressure hose bolt | 63.7-73.5 | 650-750 |
| Concentric slave cylinder mounting bolt | 11.8-14.8 | 120-150 |
TORQUE SPECIFICATIONS