SPECIFICATIONS
| Items | Specifications | |
|---|---|---|
| Steering column/shaft | Tilt, Telescopic | |
| Steering gear | Type | Rack & pinion |
| Rack stroke | 140 mm (5.51 in) | |
| Steering angle | Inner | 39.52° |
| Outer | 32.17° | |
| Power steering pump | Type | Vane |
| Relief pressure | 90 kgf/cm 2 (1280 psi) | |
| Discharge | 9.6 cc/rev | |
| Power steering fluid | PSF-4 | |
STEERING SPECIFICATIONS
TIGHTENING TORQUE
| Items | N.m | Kgf.m | Lb-ft | |
|---|---|---|---|---|
| Hub nut | 90-110 | 9.0 - 11.0 | 65-80 | |
| Steering wheel lock nut | 40-50 | 4.0-5.0 | 29-36 | |
| Steering column mounting bolts and nut | 13-18 | 1.3-1.8 | 9.4-13.0 | |
| Bolt connecting steering column to universal joint | 18-28 | 1.8-2.5 | 13-18 | |
| Bolt connecting universal joint to steering gear | 30-35 | 3.0-3.5 | 22-25 | |
| Steering gear box to sub-frame bolts | 60-80 | 6.0-8.0 | 43-58 | |
| Power steering pump mounting bolts | 2.4L | 17-26 | 1.7-2.6 | 12-19 |
| 2.7L | 35-50 | 3.5-5.0 | 25-36 | |
| Pressure tube to oil pump eye bolt | 55-65 | 5.5-6.5 | 40-47 | |
| Pressure tube to valve body housing nut | 12-18 | 1.2-1.8 | 9-13 | |
| Stabilizer link to front strut assembly nut | 100-120 | 10.0-12.0 | 72-87 | |
| Front roll stopper bolt and nut | 50-65 | 5.0-6.5 | 40-47 | |
| Rear roll stopper bolt and nut | 50-65 | 5.0-6.5 | 40-47 | |
| Sub-frame to body bolts and nuts | 160-180 | 16.0-18.0 | 116-130 | |
| Tie rod end castle nut | 24-34 | 2.4-3.4 | 17-25 | |
| Front lower arm ball joint assembly bolts | 100-120 | 10.0-12.0 | 72-87 | |
| Heat protector bolts | 7-11 | 0.7-1.1 | 5-8 | |
STEERING TIGHTENING TORQUE