Home ReviewsRefund
Home/Kia/Optima/Kia Optima II (2005-2008)/Repair manual/Ignition System/Ignition System (Engine Electrical System (G6EA - Gsl 2.7L)…
Contents Wiring diagrams Section: Ignition System All sections

Ignition System (Engine Electrical System (G6EA - Gsl 2.7L)): Other Kia Optima II

Ignition System ~125 words

IGNITION COIL

  1. Remove the engine cover.
  2. Remove the ignition coil connector (A).
  3. Remove the ignition coil.
  4. Installation is the reverse of removal.

SPARK PLUG

  1. Remove the ignition coil connector (A).
  2. Remove the ignition coil.
  3. Using a spark plug socket, remove the spark plug. CAUTION: Be careful that no contaminants enter through the spark plug holes.
  4. When replacing the spark plug, always use the long reach type spark plug. Do not use a short reach type. Color Marking (Tip). [2.7L] Unleaded: Yellow Marking Leaded: Green Marking [Others] Marking Color is different or does not exist Length (Tip-Tip/PT Length). 2.7L: 83.2mm/26.5mm [Others] The length is different from the specification above. Part ID. [2.7L] Unleaded: ILFR5B11 Leaded: LFR5A

More articles — Ignition System (Engine Electrical System (G6EA - Gsl 2.7L))