Monitor Conditions
- When Monitored: Ignition on.
Set Conditions
- Set Condition: The PCM gets an implausible signal over the CAN C circuit from the ABS Module. The circuit is continuously monitored.
Possible Causes
| Possible Causes |
|---|
| VEHICLE SPEED SENSOR FAULT ACTIVE IN ANTI-LOCK BRAKE MODULE |
| CAN C BUS CIRCUIT SHORTED |
| CAN C BUS CIRCUIT OPEN |
| ABS MODULE |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure .