TORQUE SPECIFICATIONS
| Description | Ft.Lbs. (N.m) |
|---|
| Starter Mounting Bolts - 2.4L | 40 (54) |
| Starter Mounting Bolts - 3.7L | 40 (54) |
| INCH Lbs. |
| Starter Heat Shield Mounting Bolts | (53) (6) |
| Starter Solenoid Battery Cable Nut | (97) (11) |
STARTER MOTOR SPECIFICATIONS
| Application | Specification |
|---|
| Engine | 2.4L / 3.7L |
| Power Rating | 1.4 Kilowatt (1.9 Horsepower) |
| Voltage | 12 Volts |
| Number of Perminant Magnets (2) | 6 |
| Number of Brushes | 4 |
| Drive Type | Planetary Gear Reduction |
| Free Running Test Voltage | 11.2 Volts |
| Free Running Test Maximum Amperage Draw | 90 Amperes |
| Free Running Test Minimum Speed | 2400 rpm |
| Solenoid Closing Maximum Voltage Required | 7.8 Volts |
| Cranking Amperage Draw Test (1) | 160 Amperes |
| (1) Test at operating temperature. Cold engine, tight (new) engine, or heavy oil will increase starter amperage draw. (2) The Starter is equipped with perminent magnets. Never strike the starter case to attempt to loosen a sticking/stuck armature as permanent magnets may crack or break. |
| (1) | Test at operating temperature. Cold engine, tight (new) engine, or heavy oil will increase starter amperage draw. |
| (2) | The Starter is equipped with perminent magnets. Never strike the starter case to attempt to loosen a sticking/stuck armature as permanent magnets may crack or break. |
STARTER MOTOR SPECIFICATIONS
