Continuously Variable Transmission (Cvt) - Service Information: Specifications

Continuously Variable Transmission (Cvt) - Service Information: Specifications Jeep Compass I рестайлинг

SPECIFICATIONS

DESCRIPTION	SPECIFICATION
Forward clutch	1.2-1.5 mm (0.047-0.059 in.)
Total end play	0.25 - 0.55 mm (0.010 - 0.022 in)
Required differential preload	0.17 to 0.29 mm (0.007 to 0.011 in)
Required preload, Reduction gear	0.13-0.19 mm (0.005-0.0075 in)
Reduction Assembly required select shim	Reduction assembly measurement, minus reduction assembly measurement, plus reduction assembly measurement, plus 0.16 mm (0.006 in).
Required clearance, Oil pump drive sprocket	0.10-0.23 mm (0.004-0.009 in.) The select shim is equal to the oil pump drive sprocket measurement one plus the oil pump drive sprocket measurement, two minus 0.16 mm (0.0065 in.).
Torque converter installed depth	At least 13 mm

CLEARANCES

DESCRIPTION	N.m	Ft. Lbs.	In. Lbs.
Bolts, drive belt assembly - to - transaxle case	45	33
Bolt, Detent spring to case	7		61
Bolts, oil pump - to - transaxle case	19	14	168
Bolt, oil pump - to - transaxle case (outside)	28	20	247
Bolts, Valve body assembly - to - case	8		70
Nut, Valve body manual lever - to - manual shaft	22	16	194
Bolts, Oil strainer to valve body	8		70
Bolts, oil pan - to - transaxle case	8		70
Bolts, baffle plate	6		52
Bolts, oil pump cover	26	19	230
Bolts, Bracket oil pump cover - to oil pump	26	19	230
Bolts, Baffle plate	26	19	230
Bolts, Baffle plate at oil pump driven sprocket	6		52
Bolts, Converter housing - to - transaxle case	45	33	398
Bolts, TRS	6		49
Nut, Shift lever to manual shaft	17	13	150
Bolt, Speed input sensor - to - transaxle case	6		52
Bolt, Speed output sensor - to - transaxle case	6		52
Bolts, Fluid cooler - to - transaxle case	4		37
Bolts, transmission bell housing - to - engine	48	35
Bolts, Transmission crossmember	75	55
Nut, Rear mount through bolt	75	55
Bolts, Rear mount to transaxle	75	55
Bolts, Torque converter	48	35
Bolts, Upper transmission mount	75	55
Bolts, PTU support bracket	68	50
Bolt, Catalytic Converter Support Bracket	28		250
Nut, Upper mount through bolt	75	55
Bolts, Throttle body support bracket	11		105
Nut, Shifter cable	11		105
Bolts, Transmission fill tube	9		79
Nut, Reduction gear	250	185
Bolts, Shifter - to - floor	70	52
Bolts, Bracket to Valve Body	8	70

TORQUE SPECIFICATIONS