Home ReviewsRefund
Home/Jeep/Compass/Jeep Compass I (2006-2010)/Repair manual/2.0L Engine - Service Information/CLEANING
Contents Wiring diagrams Section: 2.0L Engine - Service Information All sections

CLEANING Jeep Compass I

2.0L Engine - Service Information 2 illustrations ~116 words

CLEANING

Clean ladder frame with a plastic or wooden scraper and a suitable solvent. See STANDARD PROCEDURE .

Scheme 219

Scheme 219: LADDER FRAME
Scheme 219: LADDER FRAME

Note. When using RTV, the sealing surfaces must be clean and free from grease and oil.

Note. When using RTV, parts should be assembled in 10 minutes and tighten to final torque within 45 minutes.

Scheme 220

Scheme 220
Scheme 220
  1. Apply a 2 mm bead of Mopar® engine sealant RTV or equivalent as shown in illustration.
  2. Install bolts and tighten as shown in illustration following a two step method. First: All to 10 N.m (89 in. lbs.). Second: All to 26 N.m (19 ft. lbs.).
  3. Install balance shaft module. See «INSTALLATION»(ref-304329-S27260761992008110700000) .
  4. Install oil pan. See «INSTALLATION»(ref-304329-S34519148672008110700000) .