Exhaust System: Component Locations Jeep Compass I рестайлинг 2

SPECIAL TOOLS

CH8519 - Hose, Exhaust Back Pressure

Scheme 16

Scheme 17

1. Disconnect isolator from exhaust system component.
2. Remove screws attaching isolator bracket to underbody.
3. Remove isolator assembly.

Scheme 18

1. Position isolator bracket to underbody and install attaching screws. Tighten bracket screws to frame rail to 8.5 N.m (75 in. lbs.) and bracket screws to the rear panel to 3.7 N.m (33 in. lbs.).
2. Connect isolator to exhaust system component.
3. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
4. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.